Àpèjúwe

This plugin outputs Xtreme Locator‘s embed forms directly into your pageÌtumọ̀ Yorùbá: ’s HTML — the same markup Xtreme Locator normally distributes for direct embedding, packaged as a WordPress shortcode and widget so it can be dropped in anywhere without editing theme files or using an iframe on the search box itself.

Requires an Xtreme Locator account

This plugin is the WordPress integration for Xtreme LocatorÌtumọ̀ Yorùbá: ’s location search service — it does not include location data or search logic of its own. YouÌtumọ̀ Yorùbá: ’ll need a Site ID from an Xtreme Locator account to configure it:

New to Xtreme Locator? Start a free trial. Xtreme LocatorÌtumọ̀ Yorùbá: ’s free plan supports up to 15 locations at no cost, so smaller businesses can use this plugin without paying anything.
Already have an account? Enter your Site ID under Settings Xtreme Locator after installing.

Until a Site ID is entered, the plugin shows a short setup reminder to site admins only; regular visitors simply wonÌtumọ̀ Yorùbá: ’t see the search box.

Search types

Four search types are supported, chosen via the type shortcode attribute or the site-wide default in Settings Xtreme Locator:

zip — a single zip/postal code field (the original default).
zip_distance — zip code plus a distance/radius field.
international — a country dropdown plus a postal code field, powered by Xtreme LocatorÌtumọ̀ Yorùbá: ’s own country-picker script.
near_me — a single “Locations Near Me” button that uses the visitorÌtumọ̀ Yorùbá: ’s browser location (no typing required).

Results stay on your site

When a visitor searches, they are NOT sent to app.xtremelocator.com. Instead the plugin loads a page on your own WordPress site (same domain, wrapped in your themeÌtumọ̀ Yorùbá: ’s header/footer) that shows the results inside a sandboxed iframe pointed at Xtreme Locator. The address bar stays on your site the whole time, and the results content (including any script Xtreme Locator uses for a map or dynamic list) runs isolated inside that iframe rather than directly inside your page. This applies to all four search types, including “Near Me” — Xtreme LocatorÌtumọ̀ Yorùbá: ’s own code normally opens that one in a new tab on their domain, but this plugin routes it through the same in-site results page as the others. The optional “Advanced Search” link uses the same in-site iframe pattern too.

A “Results not showing? Open in a new tab” link is included under the iframe as a fallback, in case a visitorÌtumọ̀ Yorùbá: ’s browser or an ad-blocker interferes with the embedded frame.

Fully customizable

Go to Settings Xtreme Locator to customize the search boxÌtumọ̀ Yorùbá: ’s text (heading, field labels/placeholders for each search type, button/link text), colors and appearance (button, heading, text, background, border, font, width), layout (inline vs. stacked), and to control the results iframe — its width, height, and whether it shows a scrollbar (auto / always / never). Any setting can also be overridden per-instance with a shortcode attribute.

Known limitations:

Only one “International” search box can be placed per page. Xtreme LocatorÌtumọ̀ Yorùbá: ’s country-picker script (searchByCountryJS.php) targets fixed field IDs, so a second instance on the same page would conflict with the first.
I wasnÌtumọ̀ Yorùbá: ’t able to inspect Xtreme LocatorÌtumọ̀ Yorùbá: ’s searchByCountryJS.php or api/search.js scripts directly (they didnÌtumọ̀ Yorùbá: ’t return readable source through my tools), so the International and Near Me search types are implemented based on the embed code you provided plus reasonable assumptions about how those scripts behave. Please test both after installing — in particular, confirm the International search box still submits to your own site rather than being redirected elsewhere by Xtreme LocatorÌtumọ̀ Yorùbá: ’s script, and that the Near Me results page renders a proper results page inside the iframe rather than raw data.
The “Postal code search not available for this country” message (see below) assumes Xtreme LocatorÌtumọ̀ Yorùbá: ’s script disables or read-onlys the postal code field when a country doesnÌtumọ̀ Yorùbá: ’t support postal code search — thatÌtumọ̀ Yorùbá: ’s the standard pattern for this kind of widget, but since I canÌtumọ̀ Yorùbá: ’t inspect their script directly, please verify it actually shows for an unsupported country after installing. If their script signals unavailability a different way, let me know what you observe and I can adjust the detection.
The Custom Search Form field (Settings Xtreme Locator Custom Search Form) is stored and displayed as entered — it is not filtered through WordPressÌtumọ̀ Yorùbá: ’s usual HTML sanitization, since that would strip the <form>/<input>/<select> elements a search form needs. Only paste code from a source you trust. A relative <form action="..."> is automatically resolved against app.xtremelocator.com and results are routed into an iframe instead of navigating away, but surrounding markup (labels, layout, a stray “Back” link, etc.) is left exactly as pasted — trim a full copied page down to just the form and its buttons before pasting for the cleanest result.

External Services

This plugin is a WordPress front end for Xtreme LocatorÌtumọ̀ Yorùbá: ’s location search service and connects to Xtreme LocatorÌtumọ̀ Yorùbá: ’s servers (app.xtremelocator.com) to function. No location data is stored or processed by this plugin itself — it just points the visitorÌtumọ̀ Yorùbá: ’s browser at Xtreme LocatorÌtumọ̀ Yorùbá: ’s service using the Site ID configured under Settings Xtreme Locator.

Specifically:

Search form submission and results. When a visitor submits a search, their browser loads an iframe pointed at https://app.xtremelocator.com/visitor/findLocations.php (Zip, Zip + Distance, and International search types) or https://app.xtremelocator.com/api/search.php (Near Me proximity search), passing the search terms they entered (zip/postal code, distance, country, or coordinates) and the siteÌtumọ̀ Yorùbá: ’s configured Site ID as query parameters. Xtreme Locator returns the results HTML, which is displayed inside the iframe on your own site.
Country picker (International search type only). Loads https://app.xtremelocator.com/visitor/searchByCountryJS.php as an enqueued script, which populates the country dropdown and validates postal code availability per country.
Browser geolocation (Near Me search type only). Loads https://app.xtremelocator.com/api/search.js as an enqueued script, which requests the visitorÌtumọ̀ Yorùbá: ’s location via their browserÌtumọ̀ Yorùbá: ’s Geolocation API (with the browserÌtumọ̀ Yorùbá: ’s own permission prompt) and returns coordinates used to build the results URL above.
Advanced Search link (optional, off by default). Like the main search, this loads https://app.xtremelocator.com/visitor/advanced.php inside the same sandboxed iframe on your own siteÌtumọ̀ Yorùbá: ’s results page — not a direct new-tab link to app.xtremelocator.com.
Custom search form (optional — only if youÌtumọ̀ Yorùbá: ’ve pasted code under Settings Xtreme Locator Custom Search Form). Submits to whichever Xtreme Locator URL is in the pasted formÌtumọ̀ Yorùbá: ’s action attribute (an app.xtremelocator.com address in Xtreme LocatorÌtumọ̀ Yorùbá: ’s own embed code), with whatever fields that form collects, loaded into an iframe next to the form.

None of these requests are made server-side by this pluginÌtumọ̀ Yorùbá: ’s PHP code — theyÌtumọ̀ Yorùbá: ’re all loaded directly in the visitorÌtumọ̀ Yorùbá: ’s browser (iframe src or <script src>), the same way they would be if Xtreme LocatorÌtumọ̀ Yorùbá: ’s embed code were pasted into the page directly.

This service is provided by Xtreme Locator: terms of service, privacy policy. Start a free trial if you donÌtumọ̀ Yorùbá: ’t have an account yet (free for up to 15 locations).

Usage

Shortcode (posts, pages, any block that supports shortcodes):

[xtreme_locator_search]

Every setting on the admin settings page (see below) can also be overridden per-instance as a shortcode attribute — handy if you want different pages to use different search types, colors, or layouts:

[xtreme_locator_search type="zip_distance" title="Find Nearest Location" layout="stacked" button="#c0392b" form_width="320px"]
[xtreme_locator_search type="international"]
[xtreme_locator_search type="near_me" title=""]

Available attributes: sid, type (“zip”, “zip_distance”, “international”, or “near_me”), title, zip_label, zip_placeholder, dist_label, dist_placeholder, country_label, postal_unavailable_text, near_me_button_text, button_text, advanced (“yes”/”no”), advanced_text, button (hex), button_text_color (hex), heading_color (hex), heading_font_size (CSS length), text_color (hex), background_color (hex, blank for transparent), border_color (hex, blank for none), border_width (CSS length), font_family, form_width (CSS length), layout (“inline” or “stacked”). Attributes that donÌtumọ̀ Yorùbá: ’t apply to the chosen type are simply ignored.

Gutenberg block editor: add a “Shortcode” block and paste [xtreme_locator_search].

Classic editor: paste [xtreme_locator_search] directly into the content.

Widget areas: go to Appearance Widgets and add the “Xtreme Locator Search” widget to any sidebar or footer widget area.

Custom search form: for a search form with a different field set than the four built-in types, paste an Xtreme Locator embed snippet under Settings Xtreme Locator Custom Search Form, then place it with:

[xtreme_locator_custom_search]

The pasted formÌtumọ̀ Yorùbá: ’s fields, labels, and layout are yours to define; the plugin still applies your font, form width, and button color settings, and still keeps results on your own site (loaded into an iframe next to the form instead of navigating away). See the field description under Settings for what to paste and whatÌtumọ̀ Yorùbá: ’s handled automatically.

Settings (Settings Xtreme Locator):

Text & Labels — Site ID, default Search type, Heading, Zip/Postal Code field label & placeholder, Distance field label & placeholder, Country field label, Postal code unavailable message, “Near Me” button text, Search button text, Advanced Search link (on/off + text).

Colors & Appearance — Button color, Button text color, Heading color, Heading font size, Label/text color, Background color (blank = transparent), Border color (blank = none) + width, Font family, Form width.

Layout — Inline (label, field, and button side by side) or Stacked (each on its own line, full width — good for narrow sidebars/mobile).

Custom Search Form — Raw HTML embed code for the [xtreme_locator_custom_search] shortcode (see above), plus its own Custom search box width (independent of “Form width” above).

Results Iframe — Iframe width (e.g. 100%, 960px, 90vw), Iframe height (e.g. 900px, 80vh — increase this if results feel cramped), Scrollbar (Auto / Always / Never). Also used by the custom search formÌtumọ̀ Yorùbá: ’s results iframe.

Any of these can be overridden per-instance with a matching shortcode attribute (see Usage above).

Ìgbéwọlẹ̀

If you donÌtumọ̀ Yorùbá: ’t already have an Xtreme Locator account, start a free trial (free for up to 15 locations) to get your Site ID.
In your WordPress admin, go to Plugins Add New Plugin Upload Plugin (or search “Xtreme Locator Search” if installing from the WordPress.org plugin directory).
Install and Activate the plugin.
Go to Settings Xtreme Locator and enter your Site ID.
Add the shortcode [xtreme_locator_search] to any page or post, or add the “Xtreme Locator Search” widget to a sidebar.
Optionally revisit Settings Xtreme Locator to adjust the search boxÌtumọ̀ Yorùbá: ’s text, colors, layout, and the results iframeÌtumọ̀ Yorùbá: ’s width/height/scrollbar.

FAQ

Do I need an Xtreme Locator account?: Yes. This plugin is the WordPress integration for Xtreme LocatorÌtumọ̀ Yorùbá: ’s location search service; it needs a Site ID from an Xtreme Locator account to know which locations to search. Start a free trial if you donÌtumọ̀ Yorùbá: ’t have one — the free plan supports up to 15 locations at no cost.
Is there a free plan?: Yes, Xtreme LocatorÌtumọ̀ Yorùbá: ’s free plan supports up to 15 locations. Larger location counts require a paid plan — see xtremelocator.com for pricing.
Nothing shows up where I placed the shortcode — whatÌtumọ̀ Yorùbá: ’s wrong?: Most likely no Site ID has been entered yet. Site admins will see a short setup reminder in place of the search box; other visitors simply wonÌtumọ̀ Yorùbá: ’t see anything until itÌtumọ̀ Yorùbá: ’s configured. Go to Settings Xtreme Locator and enter your Site ID.
Does this use an iframe?: The search box itself is plain HTML — no iframe. After a visitor searches, the results are shown on your own site inside a sandboxed iframe pointed at Xtreme Locator, so the results (which can include a map or other embedded script) stay isolated from the rest of your page.
Can I have more than one search box, or different search types on different pages?: Yes. Add the shortcode with a type attribute wherever you like, e.g. [xtreme_locator_search type="near_me"]. The one exception is the “International” search type, which can only appear once per page (see Known Limitations).

Àwọn àgbéyẹ̀wò

Kò sí àwọn àgbéyẹ̀wò fún plugin yìí.

Àwọn Olùkópa & Olùgbéejáde

“Xtreme Locator Search” jẹ́ ètò ìṣàmúlò orísun ṣíṣí sílẹ̀. Àwọn ènìyàn wọ̀nyí ti ṣe ìkópa sí plugin yìí.

williqs

Túmọ̀ “Xtreme Locator Search” sí èdè rẹ.

Ṣe o nífẹ̀ẹ́ sí ìdàgbàsókè?

Ṣàwárí koodu, ṣàyẹ̀wò ibi ìpamọ́ SVN, tàbí ṣe àgbékalẹ̀ sí àkọsílẹ̀ ìdàgbàsókè nípasẹ̀ RSS.

Àkọsílẹ̀ àwọn àyípadà

1.8.6

Renamed the “Site ID (sid)” field label to “Account ID (sid)” on the Settings Xtreme Locator page. Cosmetic only — the underlying sid setting, shortcode attribute, and everywhere else itÌtumọ̀ Yorùbá: ’s referenced are unchanged.

1.8.5

Fixed: the 1.8.4 centering/label-font script was never actually reaching the page at all. It was attached to WordPressÌtumọ̀ Yorùbá: ’s own jquery script handle, which most themes have already printed in <head> by the time a shortcode runs — and wp_add_inline_script() silently does nothing once its target handle has already been printed, so the fix never loaded no matter what the pasted embed code looked like. ItÌtumọ̀ Yorùbá: ’s now attached to this pluginÌtumọ̀ Yorùbá: ’s own dedicated handle (loaded in the footer, after the shortcode has definitely run), the same technique already used by the “Near Me” script elsewhere in this plugin. Verified this time that the script tag itself is actually present in the rendered page.

1.8.4

Fixed (for real this time — verified live against a reported page): the Custom Search Form still wasnÌtumọ̀ Yorùbá: ’t centering on some pages even after 1.8.2/1.8.3. Root cause traced to a page-builder layout where the content column is a flex item that hugs its own content width and doesnÌtumọ̀ Yorùbá: ’t center itself within its row — something CSS from inside that column canÌtumọ̀ Yorùbá: ’t correct, since the ancestor doing the misplacement is outside anything this plugin renders. A small script now runs once the page loads, finds that specific situation at runtime (only when itÌtumọ̀ Yorùbá: ’s actually present — it does nothing on a normal theme layout), and centers it. Verified against the reported page: box now sits centered instead of flush left.
Added: field labels in pasted Custom Search Form code now follow the pluginÌtumọ̀ Yorùbá: ’s Font family setting and use the same readable label size as the built-in search types (1.1em), instead of whatever the pasted embed code hardcodes. Xtreme LocatorÌtumọ̀ Yorùbá: ’s own embed markup typically sets each labelÌtumọ̀ Yorùbá: ’s font-size inline with its own !important, which no CSS rule — however specific or !important — can out-rank; only editing the elementÌtumọ̀ Yorùbá: ’s own inline style directly can, so this is handled by the same runtime script as the centering fix above.

1.8.3

Fixed: on a page whose theme/page-builder template wraps content in a column narrower than the “Custom search box width” setting (seen on a page using a page-builder “full width”/blank-canvas template), the setting had no visible effect at all. The previous CSS only ever shrank the box to fit its container (a max-width cap); itÌtumọ̀ Yorùbá: ’s now an explicit width, so the box actually resizes as configured, growing past a narrow container if needed.
Fixed: once a box is wider than its immediate container, plain CSS centering (margin: auto) canÌtumọ̀ Yorùbá: ’t center it — it just hangs off the containerÌtumọ̀ Yorùbá: ’s right edge. The Custom Search FormÌtumọ̀ Yorùbá: ’s search box and results iframe now use a centering technique that works correctly even when the box is wider than the column it sits in.

1.8.2

Fixed: the “Custom search box width” setting had no visible effect on some pasted embed code. The outer search-box container was resizing correctly, but a pasted <table> or <form> with its own fixed width (common in older Xtreme Locator embed markup) was silently overriding it. Both are now forced to fill (not exceed) the box, so the width setting actually controls whatÌtumọ̀ Yorùbá: ’s visible.
Fixed: the search box (both the built-in search types and the Custom Search Form) sat flush against the left edge of its container instead of centering. It now centers the same way the results iframe does.

1.8.1

Fixed: the Custom Search FormÌtumọ̀ Yorùbá: ’s Reset/Clear button (when the pasted embed code has one) wasnÌtumọ̀ Yorùbá: ’t styled by the Button color setting at all. It now gets the pluginÌtumọ̀ Yorùbá: ’s own “xlocator-clear” class automatically, using the same Button color as the Search button — styled as an outline so the two stay visually distinguishable.
Fixed: the Custom Search FormÌtumọ̀ Yorùbá: ’s results iframe sat flush against the left edge of the page instead of centering the way the built-in search types’ results page does. The results iframe now centers itself within its container.
Added a new “Custom search box width” setting (Settings Xtreme Locator Custom Search Form), so the Custom Search FormÌtumọ̀ Yorùbá: ’s box can be sized independently of “Form width” under Colors & Appearance, which still controls only the four built-in search types. Defaults to 600px.

1.8.0

Added an optional “Custom Search Form” feature for search forms with a different field set than the four built-in types (Zip / Zip and Distance / International / Near Me). Paste an Xtreme Locator embed snippet into the new Settings Xtreme Locator Custom Search Form textarea, then place it on a page with the new [xtreme_locator_custom_search] shortcode.
The pasted formÌtumọ̀ Yorùbá: ’s results are routed into an on-page iframe next to the form (results stay on your own site) via the formÌtumọ̀ Yorùbá: ’s target attribute — no parsing of the formÌtumọ̀ Yorùbá: ’s individual fields is required, so any field set works.
A relative <form action="..."> in the pasted code (e.g. findLocations.php) is automatically resolved against app.xtremelocator.com.
The pasted formÌtumọ̀ Yorùbá: ’s Submit button automatically picks up this pluginÌtumọ̀ Yorùbá: ’s button color/text color styling from Settings Xtreme Locator Colors & Appearance, matching the built-in search types.
<script> tags in the pasted code are stripped automatically; everything else is output as entered. This field is admin-only (Settings page, manage_options) and is intentionally not run through WordPressÌtumọ̀ Yorùbá: ’s usual HTML sanitization, since that would strip the <form>/<input>/<select> elements a search form needs — documented in both the field description and this readme.

1.7.4

The “Advanced Search” link now routes through the pluginÌtumọ̀ Yorùbá: ’s own in-site results page (same sandboxed-iframe pattern used for regular searches) instead of navigating the visitor directly to app.xtremelocator.com.

1.7.3

Fixed the Button color setting (Settings Xtreme Locator Colors & Appearance) not visibly applying to the Search button or the Advanced Search link on some themes. The pluginÌtumọ̀ Yorùbá: ’s own button color/text-color/border styling now takes precedence over theme button styles that were silently overriding it.

1.7.2

Removed the “Powered By XtremeLocator” credit link feature entirely — the Settings checkbox, the option, and the front-end markup are all gone. It no longer exists in any form, on by default or otherwise.

1.7.1

Updated defaults: Zip/Postal Code label defaults to “Zip Code” and placeholder to “Enter your zip code”; Distance placeholder defaults to “Enter search distance”; Advanced Search link defaults to off; results iframe defaults to 900px wide by 1100px tall. (Only affects sites that have never saved Settings Xtreme Locator — existing saved settings are never overwritten.)
Tested up to WordPress 7.1.

1.7.0

Removed the hard-coded default Site ID (previously baked in for a single private install). The plugin now ships with no default Site ID, and clearly prompts site admins to enter their own under Settings Xtreme Locator — with a link to start a free Xtreme Locator trial (free for up to 15 locations) if they donÌtumọ̀ Yorùbá: ’t have an account yet.
Added a setup reminder shown to site admins (only) wherever the shortcode/widget is placed, or on the results page, if no Site ID is configured yet. Regular visitors simply see nothing until itÌtumọ̀ Yorùbá: ’s set up.
Updated plugin metadata (Plugin URI, Author URI) and prepared the plugin/readme for listing in the WordPress.org plugin directory.
The “International” search typeÌtumọ̀ Yorùbá: ’s country-picker script is now properly enqueued via wp_enqueue_script() instead of being printed as a raw <script> tag.
Added uninstall.php so the pluginÌtumọ̀ Yorùbá: ’s one stored option is removed when the plugin is deleted (not just deactivated).
Added an optional “Powered By XtremeLocator” credit link under the search box, off by default — an admin must explicitly opt in under Settings Xtreme Locator. (Settings-only by design — not a shortcode attribute — so only the site administratorÌtumọ̀ Yorùbá: ’s own action can turn it on.)
Fixed a Plugin Check error (missing translators comment) and two warnings (latitude/longitude sanitization not recognized by the automated scanner) flagged during WordPress.org submission review.
On the Plugins list screen, this pluginÌtumọ̀ Yorùbá: ’s row now reads “Xtreme Locator by IQServices.com” in place of WordPress’ default “By Xtreme Locator” credit line.
Fixed inconsistent short description (“results shown instead of an iframe” vs. the actual sandboxed-iframe results page).
The “Powered By XtremeLocator” credit link is now off by default; showing it requires an explicit admin opt-in (was previously on by default).
The International search typeÌtumọ̀ Yorùbá: ’s postal-availability watcher script is now attached via wp_add_inline_script() instead of a raw inline <script> tag.
Added direct links to Xtreme LocatorÌtumọ̀ Yorùbá: ’s terms of service and privacy policy in the readmeÌtumọ̀ Yorùbá: ’s External Services section (previously linked only to the homepage).
Removed the show_powered_by shortcode attribute. The “Powered By XtremeLocator” credit link can now only be enabled from the site adminÌtumọ̀ Yorùbá: ’s own Settings Xtreme Locator checkbox — not overridable via shortcode, so only the administratorÌtumọ̀ Yorùbá: ’s explicit action can turn it on.

1.6.1

Fixed a black box appearing around the search box on some themes: many themes apply a default border/background to bare <form> elements (e.g. for comment/contact forms), which was leaking into the search box since the pluginÌtumọ̀ Yorùbá: ’s own box styling lives on an inner wrapper, not the outer <form> tag. The outer element now explicitly resets border/background/box-shadow so only this pluginÌtumọ̀ Yorùbá: ’s own settings (or none, by default) show.

1.6.0

International search type: the postal code fieldÌtumọ̀ Yorùbá: ’s placeholder now switches to a configurable message (“Postal code search not available for this country” by default, editable under Settings Xtreme Locator or via the postal_unavailable_text shortcode attribute) whenever Xtreme LocatorÌtumọ̀ Yorùbá: ’s own script disables that field for the selected country.

1.5.0

Added three more search types alongside the original Zip search: Zip and Distance, International (country + postal code), and Near Me (one button using the visitorÌtumọ̀ Yorùbá: ’s browser location). Choose the default under Settings Xtreme Locator, or per-instance with a shortcodeÌtumọ̀ Yorùbá: ’s type attribute.
All four search types now route their results through your own siteÌtumọ̀ Yorùbá: ’s iframe results page — including Near Me, which Xtreme LocatorÌtumọ̀ Yorùbá: ’s own code normally opens in a new tab on their domain.
Added matching text settings/shortcode attributes: dist_label, dist_placeholder, country_label, near_me_button_text.

1.4.0

Added full customization for the search box under Settings Xtreme Locator (and matching shortcode attributes): text/labels (heading, zip field label & placeholder, button text, advanced link text), colors & appearance (button, heading, text, background, border colors; border width; font family; form width), and layout (inline vs. stacked).
Rebuilt the search box markup from an HTML <table> to a semantic, flexbox-based layout for cleaner styling and better responsiveness.

1.3.0

Added a Settings Xtreme Locator admin page: configure the default Site ID, heading, Advanced Search link, and button color used by the shortcode/widget, plus the results iframeÌtumọ̀ Yorùbá: ’s width, height, and scrollbar behavior (auto / always / never).
Widened the search box table and made the zip field/table responsive so the box no longer looks cramped in narrow columns.

1.2.0

Results now display on your own WordPress domain inside a sandboxed iframe, instead of a raw server-side passthrough. This avoids running Xtreme LocatorÌtumọ̀ Yorùbá: ’s results-page scripts with full trust in your siteÌtumọ̀ Yorùbá: ’s page, while still keeping the visitorÌtumọ̀ Yorùbá: ’s address bar on your domain throughout.
Added a “Open results in a new tab” fallback link under the iframe.

1.1.0

(Superseded by 1.2.0) Results rendered on your own WordPress domain via a server-side fetch/passthrough instead of a redirect to app.xtremelocator.com.
Added a friendly error message if the results service is unreachable or returns an unexpected response.
Added a page title for the results page.

1.0.0

Initial release. Converts the original XtremeLocator embed snippet (sid 1462) into a shortcode + widget, with escaping/sanitization and an external stylesheet in place of inline styles.