WordPress Native PHP Sessions

Description

WordPress core does not use PHP sessions, but sometimes they are required by your use-case, a plugin or theme.

This plugin implements PHP’s native session handlers, backed by the WordPress database. This allows plugins, themes, and custom code to safely use PHP $_SESSIONs in a distributed environment where PHP’s default tempfile storage just won’t work.

Note that primary development is on GitHub if you would like to contribute:

https://github.com/pantheon-systems/wp-native-php-sessions

Configuration

By default the session lifetime is set to 0, which is until the browser is closed.

To override this use the pantheon_session_expiration filter before the WordPress Native PHP Sessions plugin is loaded. For example a small Must-use plugin (a.k.a. mu-plugin) could contain:

<?php
function my_session_expiration_override() {
    return 60*60*4; // 4 hours
}
add_filter( 'pantheon_session_expiration', 'my_session_expiration_override' );<h3>CLI Commands</h3>

wp pantheon session add-index

Added in 1.4.0. This command should be run if your installation of the plugin occurred before the addition of the primary ID key to the session table in version 1.2.2. You will be automatically notified when you visit any admin page if this is the case. If there’s no message, your version is good to go. Note that this command is non-destructive, a new table will be created and the existing one preserved in a backup state until you have verified that the upgrade is functioning as expected.

wp pantheon session primary-key-finalize

Added in 1.4.0. If you have run the add-index command and have verified that the new table is functioning correctly, running the primary-key-finalize command will perform a database cleanup and remove the backup table.

wp pantheon session primary-key-revert

Added in 1.4.0. If you have run the add-index command and something unexpected has occurred, just run the primary-key-revert command and the backup table will immediately be returned to being the active table.

WordPress Multisite

As of 1.4.2 the add-index, primary-key-add and primary-key-revert commands are fully multisite compatible.

Contributing

See CONTRIBUTING.md for information on contributing.

Troubleshooting

If you see an error like “Fatal error: session_start(): Failed to initialize storage module:” or “Warning: ini_set(): A session is active.”, then you likely have a plugin that is starting a session before WP Native PHP Sessions is loading.

To fix, create a new file at wp-content/mu-plugins/000-loader.php and include the following:

<?php
require_once WP_PLUGIN_DIR . '/wp-native-php-sessions/pantheon-sessions.php';

This mu-plugin will load WP Native PHP Sessions before all other plugins, while letting you still use the WordPress plugin updater to keep the plugin up-to-date.

Installation

  1. Upload to the /wp-content/plugins/ directory
  2. Activate the plugin through the ‘Plugins’ menu in WordPress

That’s it!

FAQ

Why not use another session plugin?

This implements the built-in PHP session handling functions, rather than introducing anything custom. That way you can use built-in language functions like the $_SESSION superglobal and session_start() in your code. Everything else will “just work”.

Why store them in the database?

PHP’s fallback default functionality is to allow sessions to be stored in a temporary file. This is what most code that invokes sessions uses by default, and in simple use-cases it works, which is why so many plugins do it.

However, if you intend to scale your application, local tempfiles are a dangerous choice. They are not shared between different instances of the application, producing erratic behavior that can be impossible to debug. By storing them in the database the state of the sessions is shared across all application instances.

Where do I report security bugs found in this plugin?

Please report security bugs found in the source code of the WP Native PHP Sessions plugin through the Patchstack Vulnerability Disclosure Program. The Patchstack team will assist you with verification, CVE assignment, and notify the developers of this plugin.

Reviews

Ṣẹrẹ 8, 2022
I did not have high hopes for this, looking for plugins to resolve the issue my site was having in Site Health and figured I might as well try this after running across it on Google. I installed it, and it fixed loopback requests and API issues in Site Health. I am very impressed!
Èbìbí 15, 2021
I have no idea how this plugin even works. As I was going through the list of popular/recommended plugins, this one was way down on the list. I installed it on my test site and it didn’t break anything, so I moved it into the production site. I use a plugin that lets me view the error log without having to open an FTP client. Since installing this plugin, I’ve had almost zero errors in the log. In fact, right now it has been more than 48 hours (pretty high traffic site) and not a single error has been added to the log. Again, I have no clue how this plugin works. I understand the plugin conceptually, else I’d have never installed it. But, the specifics I do not know. What I do know for certain is that there’s a marked improvement by way of reduced errors. I think the site may even be more responsive – but it already operates with an A/A on the various page load/speed tests, so I can’t measure any difference there. This is a site with more than 70 active plugins and maybe 200 visitors a day.
Ẹrẹ́nà 10, 2021
Native PHP Sessions is easily another plugin that should be standard for WordPress. And, support is excellent too.
Ògún 5, 2020
Native PHP Sessions fixed all errors (curl errors) in my WP installation! Now wordpress shows no errors in the page status but “Top Job” 🙂 Thank you so much!
Read all 16 reviews

Contributors & Developers

“WordPress Native PHP Sessions” is open source software. The following people have contributed to this plugin.

Contributors

“WordPress Native PHP Sessions” has been translated into 3 locales. Thank you to the translators for their contributions.

Translate “WordPress Native PHP Sessions” into your language.

Interested in development?

Browse the code, check out the SVN repository, or subscribe to the development log by RSS.

Changelog

1.4.3 (November 13, 2023)

  • Fixed a PHP warning when running the pantheon session add-index command on a single site installation. [#285]

1.4.2 (November 8, 2023)

  • Fixed an issue with the pantheon session add-index PHP warning. [#276]
  • Fixed a syntax issue with the suggested WP CLI commands [#278]
  • Made wp pantheon session add-index, wp pantheon session primary-key-finalize, and wp pantheon session primary-key-revert fully multisite compatible. [#275]

1.4.1 (October 23, 2023)

  • Fixed an issue with the pantheon session add-index command not working properly on WP multisite [#270]
  • Made the notice added in 1.4.0 dismissable (stores in user meta) & hides for multisite (an update is coming to iterate through all sites on a network) [#271]

1.4.0 (October 17, 2023)

  • Adds new CLI command to add a Primary Column (id) to the pantheon_sessions table for users who do not have one. [#265]
  • Adds alert to dashboard for users who need to run the command.
  • 8.3 compatibility and code quality updates
  • Updates Pantheon WP Coding Standards to 2.0 [#264]

1.3.6 (June 1, 2023)

  • Fixes PHP 8.2 deprecated dynamic property error [#251] (props @miguelaxcar)
  • Update CONTRIBUTING.md [#252].
  • Update informational Error message for the case of headers already sent [#249].
  • Add pantheon-wp-coding-standards [#247].

1.3.5 (April 7, 2023)

  • Bump yoast/phpunit-polyfills from 1.0.4 to 1.0.5 [#245].
  • Bump tested up to version

1.3.4 (February 7, 2023)

  • Add fallback for $session->get_data() [[#237(https://github.com/pantheon-systems/wp-native-php-sessions/pull/237)]] (reported on WordPress.org)
  • Update CODEOWNERS file [#239]
  • Fix GPL license in composer.json file [#236]
  • Bump grunt from 1.5.3 to 1.6.1 [#235]

1.3.3 (January 25, 2023)

  • Bump version in pantheon-sessions.php [#234].

1.3.2 (January 25, 2023)

  • PHP 8.2 compatibility [#232].
  • Bump dealerdirect/phpcodesniffer-composer-installer from 0.7.2 to 1.0.0 [#229].
  • Update images for lint and test-behat jobs [#228].

1.3.1 (December 5, 2022)

  • Document session lifetime handling [#224].
  • Make dependabot target develop branch [#226].
  • Ignore .wordpress-org directory [#223].

1.3.0 (November 28th, 2022)

  • Added CONTRIBUTING.MD and GitHub action to automate deployments to wp.org. [#219]

1.2.5 (October 28, 2022)

  • Added #[ReturnTypeWillChange] where required to silence deprecation warnings in PHP 8.1. [#216]

1.2.4 (September 14th, 2021)

  • Increases data blob size from 64k to 16M for new session tables; existing tables will need to manually modify the column if they want to apply this change [#193].

1.2.3 (April 9th, 2021)

  • Assigns the table name to a variable before using in query [#188].

1.2.2 (March 29th, 2021)

  • Includes an auto-incrementing id column for replication support [#187].

1.2.1 (September 17th, 2020)

  • Plugin textdomain needs to be the same as the WordPress.org slug [#169].

1.2.0 (May 18th, 2020)

  • Avoids using cookies for sessions when WP-CLI is executing [#154].

1.1.0 (April 23rd, 2020)

  • Avoids initializing PHP sessions when doing cron [#149].

1.0.0 (March 2nd, 2020)

  • Plugin is stable.

0.9.0 (October 14th, 2019)

  • Refactors session callback logic into Session_Handler abstraction, fixing PHP notice in PHP 7.3 [#135].

0.8.1 (August 19th, 2019)

  • Fixes handling of ‘X-Forwarded-For’ header in get_client_ip_server() [#126].

0.8.0 (August 13th, 2019)

  • Respects various HTTP_* sources for client IP address [#122].

0.7.0 (April 3rd, 2019)

  • Adds a safety check that restores $wpdb when it’s missing.

0.6.9 (May 15th, 2018)

  • Ensures _pantheon_session_destroy() uses a return value.

0.6.8 (May 4th, 2018)

  • Switches to E_USER_WARNING instead of E_WARNING when triggering errors.

0.6.7 (April 26th, 2018)

  • Disables plugin load when WP_INSTALLING, because session table creation breaks installation process.

0.6.6 (March 8th, 2018)

  • Restores session instantiation when WP-CLI is executing, because not doing so causes other problems.

0.6.5 (February 6th, 2018)

  • Disables session instantiation when defined( 'WP_CLI' ) && WP_CLI because sessions don’t work on CLI.

0.6.4 (October 10th, 2017)

  • Triggers PHP error when plugin fails to write session to database.

0.6.3 (September 29th, 2017)

  • Returns false when we entirely fail to generate a session.

0.6.2 (June 6th, 2017)

  • Syncs session user id when a user logs in and logs out.

0.6.1 (May 25th, 2017)

  • Bug fix: Prevents warning session_write_close() expects exactly 0 parameters, 1 given.

0.6.0 (November 23rd, 2016)

  • Bug fix: Prevents PHP fatal error in session_write_close() by running on WordPress’ shutdown action, before $wpdb destructs itself.
  • Bug fix: Stores the actual user id in the sessions table, instead of (bool) $user_id.

0.5

  • Compatibility with PHP 7.
  • Adds pantheon_session_expiration filter to modify session expiration value.

0.4

  • Adjustment to session_id() behavior for wider compatibility
  • Using superglobal for REQUEST_TIME as opposed to time()

0.3

  • Fixes issue related to WordPress plugin load order

0.1

  • Initial release